PTFE Manual Press Molding machine exported to Malaysia

We are
providing our customers with the advantages of high output and low energy
consumption, SUNKOO has successfully opened its market to USA, UAE, Korea,
India, Russia, Malaysia, etc and attained good reputation among customers.
The
machine has passed all the basic and necessary test before shipment to
Malaysia. Our technical skillful staff check the machine thoroughly for all the
machine before dispatching to shipment. The testing report sent to customer for
satisfaction.
Manual molding press machine Sunkoo
HM400T:
The
machine production has capacity for tube is 150 pieces/hour and for rod is 300
pieces/hour
.
400T-Platform1000*1000
, 8KW powder.380V3P50Hz.
Max mould
height is 700 mm.The effictive travel of ram is 400mm. Down-up press for PTFE.
cylinder diameter 500mm. Inside frame 1100*1000.
Moulds for PHM400T finished size:
a.    645 x 755 x 100 mm
b.    545 x 655 x 100 mm
c.    445 x 555 x 100 mm
d.    345 x 455 x 100 mm 
Customer
Comments for Us:
“I remembered the time when I contacted with the Sunkoo Team, the
team has very good communicational skills among its customers to satisfy the
actual need. They provide me all the basic details and description about the
manual press molding machine. The prices offered was really competitive as
compared to market. Finally I am glad to have a manual molding machine. The
output is high and much efficient as compared to other machine I have. The
technical staff was very skillful and has expertise in their fields. “
What other
customers think about us:
ü  I
like its Special design for PTFE mold tube and rod. With Manual and Auto two
different type operation.
ü  Sunkoo
molding machine set up different press power level for high density. The output
quality is very good.
ü  As
a regular operator of  PTFE moldingmachine , the machine provided by Sunkoo has improved machine based design and
efficiency stability over the current machine on the market. It can be used to
mold all kinds of PTFE products. Work pressure can be adjusted within rated
pressure.
ü  The
good thing I found in the machine is, it has the independent electrical and
hydraulic system, beside this  it has the
adjustment, manual and semiautomatic operating methods and constant process and
pressure.
ü  I
am happy to have this machine, the price is very reasonable and affordable.
I’ll recommend to other manufacturer as well try once you’ll get much profit
easily.
CONTACT US:
PTFE Factory:No.8 Lvshu 3 road, Xuejia, Xinbei
District,Changzhou, Jiangsu,China.213000.
Call
us/Whatsapp:+86-13861180959
Skype:sammy.ljf

 

Mail: info@sukoptfe.com

Injection molding machines operation

An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.

molding machines

Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. Some vertical machines also don’t require the mold to be fastened. There are many ways to fasten the tools to the platens, the most common being manual clamps (both halves are bolted to the platens); however hydraulic clamps (chocks are used to hold the tool in place) and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast tool changes are required.

The person designing the mold chooses whether the mold uses a cold runner system or a hot runner system to carry the plastic from the injection unit to the cavities. A cold runner is a simple channel carved into the mold. The plastic that fills the cold runner cools as the part cools and is then ejected with the part as a sprue. A hot runner system is more complicated, often using cartridge heaters to keep the plastic in the runners hot as the part cools. After the part is ejected, the plastic remaining in a hot runner is injected into the next part.