Extrusion Coating

Extrusion CoatingExtrusion coating can be easily defined as a process which is used to coat the thermoplastic material onto a substrate like paperboard aluminum foil, woven fabric, paper, PET, BOPP film etc. Most commonly used resins in this process are various polyolefins such as ethylene vinyl acetate copolymers, polyethylene, ionomers, and polypropylene. For instance, this process is used for improving the features of paper by coating it with polyethylene, making it a better water resistant. 



Process Of Extrusion Coating 

The process of extrusion coating includes coating of a substrate with precisely metered film of molten plastic. The thin extruded molten film is pulled down onto a substrate and then into the nip which is amidst the pressure roll and chill roll, below the die. There is a specific amount of pressure in between these two rolls and this pressure forces the plastic onto the surface. This surface is moving at a speed which is faster as compared to the extruded film and the drawing of film onto the desired thickness. The entire extrusion coating line includes Extruder, Die, Chrome Plated Chilled Roll, Back Up Roll, and Winders / Unwinders. 



Advantages Of Extrusion Coating

As a process As an end product
Double sided coating can be done to achieve desired properties Provides moisture barrier properties
Solvent / adhesive free Avoid direct contact of content to the substrate
Thickness of the coating can be varied depending on the end use Provide heat seal-able characteristics
Higher line speeds Reduces loss of content





Factors Influencing Coating Performance

In the extrusion coating process, various resins are used and the entire processing is dependent on various factors that are as follows:

  • Melt Temperature
  • Die Gap
  • Air Gap
  • Chilled Roll Temperature

For extrusion coating, the resins must have some special characteristics like higher melt index (to ensure better adhesion), free from additives, and ideal amount of antioxidants. In addition to these, there are a couple of other characteristics that must be present in the resins; these are reduced neck-in properties and good adhesion to substrate at higher line speeds. 



Applications Of Extrusion Coating 

The extrusion coated products are wide used in the segment of synthetics woven sacks. These are also used for coating on the non-raffia substrates that primarily includes coating on Al-foil, Paper, PET & BOPP substrates. The major application areas of extrusion coating are as follows:

  • Woven sacks for fertilizer packaging
  • Tarpaulins
  • Coating on conventional jute bags
  • Soap wraps
  • Pharmaceutical strip packaging
  • Cable wraps
  • Coating on paper used in packaging of salt and sugar (sachets)
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s